Skip to content

Add a section with two auto-flow columns

With a Two Columns Auto-Flow section the page is divided into two equal columns across the page. Design elements and exercise sets are placed automatically in the columns allowing for a balanced look.

Column spacing

Column Spacing the spacing between the two columns. This is measured in 100s of an inch, so a setting of 25 equals 1/4 inch while a setting of 40 equals 1 centimeter. The range is from 0 to 100.

Restart numbering

If you are using document wide question numbering for the math document, the Restart Numbering feature will reset the section numbering back to 1.

Begin on new page

This feature provides a way to force questions and design elements to a new page. This feature can be checked at any time; the section will be forced to the next page whether it is blank or it has design elements or exercise sets added already.

Change the background color

  1. In the options panel, find and select "Background Color."

  2. Click the three dots (ellipsis) in the color box to open the color picker.

  3. Choose the color you like.

  4. Click "OK" to save your choice and apply the new color.

Adjust the padding

Sets the padding (extra white space) around the element in 100ths of an inch (25 = 1/4 inch, 40 = 1cm).

  1. Select the Padding option in the options pane.

  2. Select a side (left, right, top, or bottom) to change the value for that side.

  3. Type a new value in the input field or use the up and down arrows to increase or decrease the value. Valid range: 0 to 100.

ADD A BORDER

To show a border around an object, click the Border option in the options panel. Then, check the boxes for the sides you want to see the border on. Uncheck the boxes for the sides you don't want a border on.

Change the color

  1. In the options panel, find and select "Color."

  2. Click the three dots (ellipsis) in the color box to open the color picker.

  3. Choose the color you like.

  4. Click "OK" to save your choice and apply the new color.

Change the line width

  1. Click on "Width" in the options panel.

  2. Type a number between 0 and 10, or use the up/down arrows to adjust the width of the line.

Round the corners

Click in the check box for "Rounded" in the options panel. Uncheck the box to set the border back to square corners